Polished Finish with footrest and Provision to hold Fire Extinguisher. Made in bothh hands Choose LHD orRHD Retail £234.98
Now available, will carry Motec/Gems/Stack as well as switches Retail £92.61
New Centre dash for those who don't want any extention panel Also fits E7 and E8 with double din radio apeture or sat/nav
E8-9 Front Doorcards (For electric switches) Price: £191.25 (£229.50 Including VAT at 20%)
Choose From: Pair Right Hand only Left Hand Only
Now available Doorcards will accept standard elecric switches and are available with or without Honeycomb Retail £225.00 each Price Below is WITHOUT Honeycomb (i.e. doorbars left in door) If you remove doorbars Honycombe doorcards ARE required by F.I.A. Price Below is EACH
E8-9 Front Doorcards (Honeycomb) Price: £627.51 (£753.01 Including VAT at 20%)
Choose From: Pair Right Hand only Left Hand Only
Now available Doorcards will accept standard elecric switches Retail £738.24 Price Below is WITH Honeycomb (i.e. doorbars can be removed from door) Price Below is EACH Click for Bigger Photo
E7-8-9 Rear Doorcards (Honeycomb) Price: £496.03 (£595.24 Including VAT at 20%)
Choose From Pair Right Hand Only Left Hand Only
To match above front doorcards made with Honeycomb Doorcard is Flat not as above photo, will supply new photo soon Retail £583.56 Each Price Below is EACH
Moulded Door Cards. Made to allow door diagonals to clear Wind up Windows Retail £237.91 each Priced Below is EACH
Priced Per Pair Wind up Windows Retail £380.57
Now available for Right Hand Drive Cars Only Retail £113.67
Available for Left Hand Drive cars ONLY Retail £113.67
Fits in the centre and covers standard fresh air vents. Can be used to mount either Gems or Motec monitors or to fit normal guages and switches Now available in left and right hand drive versions retail £170.84 Click to view Larger picture
Fits directly to Co-Drivers door. Made to carry Coralba C Giant. vailable in RHD or LHD Retail £110.36
Fits over existing cover, Flat area behind hand brake lever allows mounting of various swithes/radio etc Requires Modification if used on GSR Retail £153.10
Covers the small cubby hole at the bottom of the centre dash. Ideal to mount Master Swich Retail £87.50
For those of you with imports This Blanking Plate covers the Gaping hole left when the sat-nav equipment is removed
Allows the fitment of either Stack Display or seperate Instruments etc
Fits around standard heater controls and make the area directly above, a usuable area for guages/switches Retail £118.86
Fits directly over centre consol in front of gear lever covering ashtray and cigar lighter NOTE: Now available in both Left and Right Hand Drive Versions Retail £107.17
3 Pcs to facilite fitting around Rear Cage. Mates with Rear Parcel Shelf Retail £265.09
Mates with Rear Bulkhead to "finish off" interior look of car Now modified to suit diff in 8 and 9 Retail £273.33
Full Width sits under C pillar trim, Mates with rear bulhead Retail £172.24
Copy of Standard Item in Carbon Retail £153.06
Polished Finish with footrest and Mitsubishi Logo. Comes with anti slip sections Fits both LHD and RHD Retail £234.98
Polished finish with Clutch footrest and Mitsubishi Logo Available in LHD or RHD Retail £202.62
Available in LHD or RHD with built in drivers clutch footrest Retail £119.05
Available in LHD or RHD with co-drivers footrest Retail £154.76
Carbon Sold per pair Retail £83.33
ATL E7-8 80 Litre Bladder Price: £1,732.50 (£2,079.00 Including VAT at 20%) Now Available to fit cover below Manufactured from ATLs FIA/FT3 (1999 specification) 810C Nylon reinforced material, each Mitsubishi EVO 7 is supplied fully foam baffled with a 6 x 10 top plate fitted with (1) VDO sender unit, (1) 6 fuel return and (1) 6 rollover vent valve. To obtain maximum fuel scavenge, a 8 fuel outlet is taken from a lower sump (
there is also provision to install an extra 8 fuel outlet for systems that require two external high pressure fuel pumps). In standard form, the ATL EVO 7 fuel cell is fitted with an aircraft specification flush filler cap, however, for FIA WRC events ATL also produce a retro-fit top plate that has 2 x 12 adapters to plumb into the Staubli refuelling couplings. This plate is simply fitted in place of the flush cap. ATL also produce an aluminium casing, manufactured specifically to suit the EVO 7 and to comply with FIA requirements.
E7-8 -80L Carbon Bag Tank Cover Price: £589.64 (£707.57 Including VAT at 20%) Rectangular in shape with Sump, Made to fit ATL 80L Bladder shown above Retail 693.69
Made to fit ATL's 70 Litre Bladder Retail £567.57